Image Dynamics ID10 v.3 D2 Subwoofer Review
Image Dynamics car subwoofer reviews. There are a lot of people out there that need high performance and high durability and don’t have a lot of space for subwoofers. This is part of the reason i did the previous post on 12 inch Pioneer Shallow Mount Subwoofer, even thought they sound great I know that not everyone trust this new design. This is the reason for the post today on the Image Dynamics ID10 v.3 D2.
This subwoofer has a great sound can hit very hard and require far less space than almost all subwoofers its size. This subwoofer has some very impressive specs and features as well. Reinforced polypropylene cone for the high durability. Custom powder coated basket for a very nice look if you are looking to mount them inverted. This subwoofer also has a great low level Frequency Response at 10-150 Hz. The thing that I like most about this subwoofer is the fact that you can get some much bass out of such a small enclosure. The Image Dynamics ID10 v.3 D2 only has a mounting depth of 5.5 inches and in a sealed box only needs 0.75 cubic feet of air space. So if you are looking for good bass in a small area you need to look in to the Image Dynamics ID10 v.3 D2.
Image Dynamics ID10 v.3 D2 Features and Specs
Reinforced Polypropylene Cone
Thermally Conductive Voice Coil Former
High-Roll Rubber Surround
Inverted Dust Cap with Embossed Logo
Custom Powder-Coated Basket
Full Protective Magnet Cover
Allen-Bolted Back Plate
Mounting Depth: 5.5″
Mounting Diameter: 9.125″
Size: 10 inch
Sealed Box: 0.75 cu. ft.
Ported Box: 1.30 cu. ft.
Free Air Usage: yes
Sensitivity: 86.5 dB
Frequency Response: 10-150 Hz
Recommended RMS Power: 100-300W
Peak Power Handling: 400W
Impedance: dual 2 ohms
Related posts: